TM 9-4520-271-14
0005 00
ASSEMBLY AND PREPARATION FOR USE
Continued
Fueling
1.
Remove fuel cap (1).
2.
Provide metal-to-metal contact between fuel tank (2) and dispenser (3) to avoid sparks. Grounding cable, bonding
strap, or equivalent may be used.
NOTE
If diesel fuel is not available, JP8 turbine fuel may be used as an alternate. However, greater heating
efficiency will be obtained using one of the diesel fuels recommended in step 3.
3.
Fill fuel tank with 14 gallons (53L) of fuel, depending upon ambient temperature (WP 0002 00, Table 2).
0005 00-6
