TM 9-4520-271-14
0015 00
INSTALLATION INSTRUCTIONS - Continued
7.
For power cable adapter (1) connection, proceed as follows:
a. Loosen three screws (2) on power source distribution panel (3).
NOTE
Power cable adapter is designed to attach to a 120 volt, 50/60 hertz, single-phase, grounded screw lug-type
power source or facility power.
b. Connect black wire (4) to power source hot connection and tighten screw (2).
c. Connect white wire (5) to power source return connection and tighten screw (2).
d. Connect green wire (6) to power source ground connection and tighten screw (2).
e. When power cable adapter (1) has optional 3-prong plug installed, power cable adapter may be connected to facility
power.
END OF WORK PACKAGE
0015 00-12
