TM 9-4520-271-14
0024 00
REPAIR
1.
Repair of duct cover assembly (2) is limited to replacement of defective parts.
2.
If cable assembly (6) is defective, fabricate new cable assembly.
3.
Remove locknut (7), washer (8), screw (9), and cable assembly (6) from duct cover assembly (2). Discard locknut.
4.
Attach cable assembly (6) onto duct cover assembly (2) with screw (9), washer (8), and locknut (7).
INSTALLATION
1.
Install cable (6), washer (5), lockwasher (4), and screw (3).
2.
Aline duct cover assembly (2) so two screws (1) protrude through cover.
3.
Rotate duct cover assembly (2) to engage two screws (1) and tighten screws.
END OF WORK PACKAGE
0024 00-3/4 blank
