TM 9-4520-272-14&P
0005 00
Lowering the side wheels. If the side wheels are in their raised position, they must be lowered and
locked into position to permit local mobility.
Lower the front wheel (1) by rotating the wheel jack handle (2) clockwise until the front wheel (1) contacts
the ground and begins to tilt the heater back on its snow skids. Continue until the front wheel is
completely lowered.
Remove the locking pin (3) and remove wheel and axle assembly (4).
Rotate the wheel and axle assembly (4) 90 degrees.
Reinstall wheel and axle assembly (4) and engage locking pin (3).
Repeat for the opposite wheel.
Raise the front wheel (1) by rotating the wheel jack handle (2) counterclockwise until the top of the heater
cabinet is parallel to the ground.
2
1
3
4
END OF WORK PACKAGE
0005 00-37/(38 Blank)
