TM 9-4520-272-14&P
0029 00
10. Remove the two mounting screws (12) and lockwashers (13).
11. Remove the defective solenoid valve (14).
12. Install a new solenoid valve (14) by aligning the holes in the rear of the solenoid valve with the holes
in the mounting panel (15).
13. Install the lockwashers (13) and mounting screws (12). Tighten securely.
14. Install elbow (11) on solenoid fitting (10) taking care to align the elbow fitting as noted earlier.
15. Apply pipe thread sealant to one end of the male-to-male threaded fitting (9).
16. Install the end of the male-to-male threaded fitting (9) with the applied pipe thread sealant into the
fitting (16) on the right side of the solenoid valve (14). Tighten securely.
17. Apply new pipe thread sealant to one end of elbow fitting (8).
18. Install end of elbow fitting (8) with pipe thread sealant into the fitting (17) on the left side of the
solenoid valve (14) taking care to align the elbow as noted previously.
19. Install fuel hose #3 (7) on compression fitting (6). Tighten securely.
20. Install fuel hose #2 (5) on compression fitting (4). Tighten securely.
21. Install fuel hose #1 (3) on compression fitting (2). Tighten securely.
22. Reconnect the solenoid valve electrical connector (1) by mating the two halves and pushing together
until locked.
23. Remove all tags and markings.
0029 00-2
