TM 9-4520-272-14&P
0032 00
11. Install the new 2-way solenoid valve (8) with tee fitting (10) attached by aligning the holes in the base
of the 2-way solenoid valve with the holes in the burner valve mounting bracket (13).
12. Install the two screws (12) set aside earlier. Tighten securely.
13. Apply fresh thread sealant to the threads of the elbow fitting (7) set aside earlier and install the elbow
fitting to the right side of the new 2-way solenoid valve (8). Ensure the fitting is both tight and
correctly aligned.
14. Install burner feed line (6) on elbow fitting (7) on the right side of the 2-way solenoid valve (8).
15. Connect the solenoid wire harness (11) to the 2-way solenoid valve (8).
16. Install the return fuel tube (1) by positioning the short end of the return fuel tube over fitting (3) on the
top of the 3-way solenoid valve.
17. Position the long end of the return fuel tube (1) over the fuel return to tank fitting (5). Engage return
fuel tube nut (4) on compression fitting (5) and secure.
1
2
4
5
6
8
3
11
10
13
7
9
12
END OF WORK PACKAGE
0032 00-2
