TM 9-4520-272-14&P
0078 00
2. Disconnect and remove batteries (3) IAW WP 0058 in order to provide better access to engine
compartment area.
3. Mark and disconnect wires connected to the starter (4) and sending unit (5) on engine (6).
4. Loosen clamp (7) and disconnect flexible exhaust tube (8) from engine muffler (9).
3
4
9
7
6
5
8
5. Disconnect engine shutdown solenoid cable (10) by removing cotter pin (11) and sliding retaining pin
(12) from end of cable (10). Discard cotter pin.
6. Remove fuel line clamp (13) near midpoint of engine by removing bolt securing the clamp to engine
block. Leave clamp attached to fuel line and set mounting bolt aside.
7. Close burner fuel pump shutoff valve (14).
8. Remove fuel hose (15) from tee connector (16). Catch any fuel in approved container. Wipe up any
spilled fuel with a rag.
0078 00-2