T M 9 - 4 9 3 1 - 3 8 1 - 1 4 & P -2
FRAME 11
Remove Fan (Continued):
Read paragraph 2-4 on tagging and crimping wires before
doing any work.
NOTE
1.
Cut and take off insulation sleeving (1) from wires (2,3) with pocket knife. Get rid
of sleeving (1).
2. Look at two hard splices (4) in wires (2,3). Tag wires (2,3) at splices (4).
3.
Cut wires (2,3) at splices (4). Get rid of splices (4). Turn in fan (5).
Install Fan:
4. Strip four wires (2, 3, 6, 7) with pliers. Measure 1 1/2-inch (3.8 centimeters) and cut
new sleeving (1) with rule and knife and slide new sleeving (1) over wires (2, 3).
5.
Connect wire (7) (white) (from W18P1-6) to wire (2) with new splice (4). Connect
wire (6) (black) (from W1P1-5) to wire (3) with new splice (4). Crimp two splices (4)
with crimp tool.
6.
Slide sleeving (1) over two splices (4) and using thermal gun, shrink sleeving (1).
GO TO FRAME 12
Volume IV
2-20
Para. 2-5, Task 5
