Dry cleaning solvent, P-D-680 (Item 14, Appendix F) is potentially dangerous.
Avoid repeated and prolonged breathing of vapors and skin contact with liquid.
Do not use near open flame, arcing equipment, or other ignition sources. Use
in well-ventilated area.
Prior to removal or disassembly of electrical components, clean exterior by scraping off excess oil
and dirt. Wipe with a clean lint free cloth (Item 15, Appendix F) dampened with cleaning solvent
(Item 14, Appendix F).
Safety glasses must be used when cleaning parts with compressed air. Failure to do so may
result in injury to eyes.
Do not immerse oil soaked bearings or sealed bearings in cleaning solvent. Damage may
occur to bearings.
Clean armatures, coils, and solenoids with compressed air and wipe clean with lint-free cloth (Item
15, Appendix F) dampened in cleaning solvent (Item 14, Appendix F).
Wipe electrical terminals with a clean, lint-free cloth (Item 15, Appendix F) dampened with cleaning
solvent (Item 14, Appendix F). Use a soldering iron to clean solder from terminals and connectors.
Gaskets, Seals and O-Rings.
Clean all old gasket particles from mating surfaces.
Discard and replace all gaskets, seals, O-rings, and flat washers.