5-10. FUEL PUMP ASSEMBLIES. (CONT)
j. Press port housing (26) from body (14) and remove port housing gasket (27).
Dry cleaning solvent, P-D-680 (Item 14, Appendix F) is potentially dangerous. Avoid
repeated and prolonged breathing of vapors and skin contact with liquid. Do not use near
open flame, arcing equipment, or other ignition sources. Use in well ventilated area.
k. Clean all parts in solvent.
a. Install port housing gasket (27) and port housing (26) by pressing in place.
b. Inset sleeve retaining spring (16), gasket (15) and nozzle plug assembly (14).
c. Install piston assembly (25), piston spring (24), spring seat (23), gasket (22), and end plug assembly (19, 20, 21).
d. Install O-ring (13), washer (12), seal (11), and stationary face seal (10).
e. Press shaft assembly (9) into body and install O-ring (8) and retaining ring (7) onto shaft assembly (9). Install
end plate (6) and secure with five screws (5).
g. Push strainer (4) into pump.
h. Assemble gasket (3) and cover (2) and secure to pump body with eight screws (1).
i. Install elbow (9), plug (12) and elbow (10) on fuel pump (5).
j. Install coupling (1) onto shaft of fuel pump (5) and secure with setscrew (2).