SPACE HEATER ARCTIC (SHA)
OPERATION UNDER USUAL CONDITIONS
Reinstall the Rear Door (1) by placing the bottom edge of the door in the slot at the bottom of the heater
frame. Press down on the door and swing it into position in the heater frame until the pin on the frame
engages with the small slotted hole on the top edge of the rear door. Release the Rear Door.
Slide the front door latch (5) to the left and open the front door (6). Remove the Burner Cover Assembly if
it is installed in the door frame.
Remove the Fuel Overflow Hose (7) (stored inside the Nested Stack Assembly), Fuel Supply Hose (8),
Nested Stack Assembly (9), Burner Reaming Tool (10), Lid Assembly (11) and Solid Fuel Grate (12).
Install the Burner Cover Assembly (refer to next section for details). Close and latch the Front Door (6).