TM 5-3895-377-13&P
(6)
Inspect brake drum for excessive wear. Replace brake drum if not within the following specifications:
Nominal Internal Diameter
12.000 in. (30.480 cm)
Maximum Usable Diameter
12.090 in. (30.709 cm)
Remachining Diameter
12.020 in. (30.531 cm)
Allowable Radial Variance
0.015 in. (0.038 cm)
(7)
Replace all parts failing inspection.
c.
Installation.
(1)
If removed, install eight studs (12) in
hub and drum assembly (2).
NOTE
Pack bearings and apply a light coat
of grease on outer surface of cups
before installing.
(2)
Using press, install bearing race (11) in
hub and drum assembly (2).
4-143