TM 5-3895-377-13&P
4-67.
FLAME DETECTOR REPLACEMENT/ADJUSTMENT (CONT).
(12)
Remove two terminals (28) from wires (26 and
27).
(13)
Loosen two screws (26) and remove connector
(25) from conduit (30) and wires (26 and 27).
(14)
Loosen two screws (31) and remove conduit (30)
from wires (26 and 27) on flame detector (2).
b.
Installation.
(1) Install conduit (30) on two wires (26 and 27) and
flame detector (2) and tighten two screws (31).
(2) Install connector (25) on wires (26 and 27) and
conduit (30) and tighten two screws (29).
(3) Position wires (26 and 27) and connector (25) in
electrical box (23).
(4) Install nut (24) on connector (25). Tighten nut.
4-164