TM 5-3895-377-13&P
NOTE
Tag and mark all wires prior to removal.
Mark position of connector prior to removal.
(4) Disconnect six wires (9) and connector (10) from thermostat (11).
(5) Loosen setscrew (12) and remove knob (13) from thermostat (11).
(6) Remove nut (14), lock washer (15), and thermostat
(11) from panel (8). Discard lock washer.
b. Installation.
(1) Install thermostat (11) on panel (8) with lock washer
(15) and nut (14). Tighten nut.
(2) Turn shaft of thermostat (11) counterclockwise until it
stops.
NOTE
The right-side thermostat will be at the
zero degrees mark when the knob
meets the post.
(3) Position knob (13) on shaft so the indicator line is at
the zero degrees mark on the data plate (16).
(4) Tighten setscrew (12).
(5) Connect six wires (9) and connector (10) to
thermostat
(11).
4-189