TM 5-3895-377-13&P
(2)
With the aid of an assistant, position gasket (18),
plate (14), eight screws (13), lock washers (12),
nuts (11), and plumbing section (1) on valve no.
2 (15). and plumbing section (10). Do not
tighten nuts.
(3)
Position gasket (17), four screws (9), lock
washers (8), and nuts (7) in plumbing sections
(10 and 1). Do not tighten nuts.
(4)
Position eight screws (4), plate (5), lock washers
(3), and nuts (2) in valve no. 3 (6) and plumbing
section (1).
(5)
Tighten nuts (2, 11, and 19) to 110 lb-ft (149
N.m).
(6)
Tighten nuts (7) to 55 lb-ft (75 N.m).
NOTE
Follow-on Maintenance:
Fill expansion tank with oil (page
3-14).
Remove wheel chocks (page 2-
35).
END OF TASK
4-215