Place valve (1) in soft-jawed vise.
Install thrust ring (6) on plug (3).
Install plug (3), spring (5), and bottom cover (4) in valve (1). Tighten bottom cover.
Adhesives, solvents, and sealing compounds can burn easily, can give off harmful vapors, and are
harmful to skin and clothing. To avoid injury or death, keep away from open fire and use in a well-
ventilated area. If adhesive, solvent, or sealing compound gets on skin or clothing, wash
immediately with soap and water.
Insert sealing compound (item 8, appendix E) in plug (3).
Install injection nipple (2) in plug (3).
Follow-on Maintenance: Install valve No. 2 (page 4-211) or valve No. 3 (page 4-214).
END OF TASK