TM 9-4520-271-14
0022 00
REMOVAL
1.
Remove four screws (1) and exhaust protective cover (2).
2.
Remove four screws (3), four lockwashers (4), seal plate (5), and gasket material (6). Discard lockwashers.
3.
Remove ten screws (7), lockwashers (8), washers (9), and isolator frame (10). Discard lockwashers.
4.
Open side rear door (11).
5.
Disconnect tube assembly (12) from elbow (13) and tube assembly (14) from straight connector (15). Cover tube
assemblies (12 and 14) to prevent any foreign matter from entering tube assembly. Remove dust cap (16).
0022 00-2