TM 9-4520-271-14
0045 00
REPAIR
Repair is limited to replacement of defective parts.
ASSEMBLY
NOTE
Procedures are typical for each of the four tiedown rings.
1.
Install tiedown ring (16) with washer (15) and slotted nut (14) onto frame (17). Handtighten only.
2.
Loosen slotted nut (14) until tiedown ring (16) swivels freely and install cotter pin (13).
NOTE
Information plates are attached using two or four rivets. Install the quantity of rivets the configuration
requires.
3.
Install following six information plates with rivets (6) as required:
SUPPLY CONNECTION (12)
HEATER, ELECTRIC POWERED, MULTIFUEL (11)
LUBRICATION CHART (10)
RETURN CONNECTION (9)
ELECTRICAL POWER LEAD-IN CABLE (8)
J3, REMOTE CONTROL BOX (7)
4.
Install four rivnuts (5).
5.
Install handbook compartment (4) with four washers (3), lockwashers (2), and screws (1).
END OF WORK PACKAGE
0045 00-3/4 blank