PREPARATION FOR MOVEMENT
Do not set up the ASH on extremely unleveled terrain (greater than 10 degrees (178 mils)) from true
horizontal position). Improper operation or damage to equipment may result.
Perform shutdown procedures (WP 0005 00) and disconnect power cable from power cable adapter. Wrap power cable
around supply and return air duct openings.
Disconnect supply and return air hose assemblies (WP 0019 00) and stow hoses in storage containers. Install supply and
Dispose of contaminated fuel per FM 10-67-1.
If used, disconnect external fuel hose and drain residual fuel. Install plug and cap onto hose and stow (WP 0008 00).
Install dust cap on external fuel port.
Stow wheel assemblies as follows:
Do not overextend jack or damage to jack may result.
a. Raise front of ASH by extending attached jack assembly (1).
b. Remove wheel pin (2) and move wheels (3) up toward rear of ASH and install wheel pin.
c. Lower front of ASH.