10. Install two O-rings (9) (item 38, WP 0062 00) onto two electrodes (8) toward tips.
Cleaning compound solvent vapors are toxic. Avoid prolonged or repeated breathing of vapors or solvent
contact with skin. Use only with adequate ventilation. Solvent is flammable and should not be used near
open flame. Be sure a fire extinguisher is available.
11. Clean white porcelain on two electrodes (8) with cleaning compound solvent.
12. Measure approximately 1.4 inch (3.5 cm) from connector end of two electrodes (8) and treat next 1 inch (2.5 cm) of
porcelain with sealing compound primer.
Only areas treated with the sealing compound primer should have retaining sealing compound applied.
13. Apply two drops of retaining sealing compound onto two electrodes (8) and spread over treated area.