FUELING THE LCFH
Do not use unauthorized fuels! Use of unauthorized fuel may result in
fire/explosion causing severe injury or death.
Fueling the internal fuel tank.
Be sure to place a petroleum absorbent material or mat under the fuel panel to catch any
fuel that may spill or drip during the fueling operation. Be sure to dispose of the soiled
material and/or mat in accordance with unit SOP and local environmental regulations.
Be sure to rotate the fuel can when filling the LCFH internal fuel tank to ensure that the
fuel can is completely empty.
To fill the internal fuel tank (1) with an approved fuel as listed in WP 0002 00, remove the fuel filler cap (2)
on the rear of the heater.
Fill the fuel tank with approved fuel until the fuel can be seen just below the filler neck. The LCFH fuel
tank has a capacity of 35 gallons.
When the tank is full, replace the fuel filler cap (2) and tighten securely. The fuel level in the tank is
constantly displayed on the fuel gauge (3).
Wipe up any spilled fuel with a wiping rag. Dispose of soiled rags and/or or petroleum absorbent mat in
accordance with local environmental regulations.