PREPARATION FOR MOVEMENT
Stowing the external fuel supply. If operating from an external fuel supply, the external fuel hose (1)
must be stowed prior to movement.
Disengage the external fuel hose (1) by pushing back the outside collar of the external fuel connector (2)
while pulling the external fuel hose.
Install the dust cap (3) on the male quick disconnect end (4) of the external fuel hose (1).
Starting at the heater, begin coiling the external fuel hose while holding the hose at a higher level than the
bulk fuel supply. This will force any fuel in the external fuel hose back into the bulk supply container.
Once at the bulk fuel container connector, remove the 5/16 JIC female flair fitting (5) and install the dust
Return the coiled external fuel hose to its stowage location (7) on the engine access door (8).