Stowing the flexible inlet and outlet ducts.
Gloves should be worn to protect against cuts and/or pinched fingers. Failure to do so
could result in injury to hands.
To prepare the ducts for movement, untie the tent duct tunnel ties and remove the ducts from the inlet
and outlet tent duct tunnels.
At the heater duct opening (1), push in and rotate the duct end ring (2) counterclockwise to disengage the
end ring (2). Pull the duct (3) straight out from the heater.
Repeat for second duct.
To stow the flexible duct, place the opening (4) flat on the ground and compress the remaining duct (5)
until the end is reached and the internal hook (6) can be engaged on the large internal hoop (7).
Repeat for second flexible duct.
Stow both flexible ducts in a location that prevents them from being damaged.