TM 9-4520-272-14&P
0052 00
5. Disconnect the two high tension cables (7 and 8) from the ignition pack (5).
6. Remove the defective ignition pack (5).
7. Install a new ignition pack (5) by positioning it near the burner cover (6) and reconnecting the high
tension cable assemblies (7 and 8) in accordance with the tags made earlier.
8. Align the ignition pack holes with the holes in the burner cover (6) and install the two hex head cap
screws (2), flat washers (3), and lock washers (4). Tighten securely.
9. Reconnect the ignition pack wiring harness (1).
10. Remove all tags and/or markings.
3
2
4
6
5
Note: 7 and 8 are
behind ignition pack
and are not shown
1
END OF WORK PACKAGE
0052 00-2