TM 10-4520-259-13&P
b.
Feed cable (2) under water heater and connect connector (1) to spark plug (5).
c.
Tighten cable connectors.
FOLLOW-ON MAINT.
Connect power cable and turn power on.
4-19. FUEL FILTER ASSEMBLIES (M-80) AND (M-85).
This task covers:
a.
Remove
b.
Repair
c.
Install
INITIAL SETUP:
Tools:
Tool Set, General (Appendix B, Item 1)
Materials/Parts:
Rags, Wiping (Appendix F, Item 15)
Packing Kit
Washer, Lock MS 35333-39
Washer, Lock MS 35333-40
Washer, Flat MS 27183-10
Equipment Condition:
Water heater shut off and cooled down.
Power switch off and power cable disconnected.
REMOVE
Remove the fuel filter assembly (M-80) as follows:
WARNING
Exposed fuel and fuel vapor can ignite or explode resulting in severe injury or
death. Observe proper safety precautions when servicing fuel system. Ensure
water heater is cooled down before servicing fuel system.
a.
Disconnect fuel supply line (1) from elbow (2), elevate hose to allow fuel to drain into container.
Rest hose on container.
4-43
