TM 10-4520-259-13&P
4-19. FUEL FILTER ASSEMBLIES (M-80) AND (M-85). (CONT)
d.
Install new gasket (18), filter bowl (17), securing plate (16) and secure to fuel filter head (14) with
four screws (15).
e.
Install brace (12) on fuel filter (7) and secure with two screws (3), lockwasher (5), flatwasher (6),
and nuts (4).
INSTALL
Install fuel filter assembly (M-80) as follows:
a.
Join filter (7) to nipple (14) and turn clockwise until tight.
b.
Install fuel filter brace (12) to mounting bracket (13) using two screws (11), two lockwashers (9),
two flat washers (10) and two nuts (8).
c.
Install elbow (2).
d.
Install two capscrews (3), two nuts (4), two lockwashers (5) and two flatwashers (6). Connect fuel
line (1) to elbow (2).
Install fuel filter assembly (M-85) as follows:
NOTE
If bowl and gasket were replaced, ensure there are no fuel leaks.
a.
Install nipples (2) in filter (7). Inlet side takes large nipple and outlet side takes small nipple.
b.
Position fuel filter (7) on fuel filter brace (12) and secure with two screws (3), flat washers (5),
lockwashers (6) and nuts (4).
c.
Install fuel filter brace (12) to mounting bracket (13) using two screws (11), two lockwashers (9),
two flat washers (10) and two nuts (8).
d.
Connect hoses (1) to nipples (2).
Change 2 4-46
