TM 10-4520-262-12&P 0024 00
0024 00-2
6. Install a new power control assembly (1) by putting it into position on the lower housing assembly
(6).
7. Install the four mounting screws (5) and secure.
8. Install the five wires (2) with spade lugs to their original position along the top edge of the power
control assembly. Be sure that the number marked on each wire matches the number labeled on
the heater control assembly board.
9. Install the two connectors (3 and 4) on the left and right side of the power control assembly (1).
END OF WORK PACKAGE
2
3
4
5
1
6
2
