TM 10-4520-262-12&P 0005 00
0005 00-4
11. Repeat steps 6 thru 10 for the other hole location.
12. Once the large holes have been cut out, remove the plain rings and hardware from the wall.
13. Install a cuff ring where the plain ring was previously located on the inside tent wall with the fabric
cuff pushed through to the outside of the tent.
14. Line up and install the bolts through the cuff ring and the tent wall. Use the Philips screwdriver to
help in screwing the bolts through the fabric to the outside.
15. Squeeze and push the plain ring through the cuff ring to the outside.
