TM 10-7310-241-12&P
4-22.2 Change 1
4-16.1 REPLACMENT OF THE CONTROL PANEL ASSEMBLY FOR MODEL 471012 (Continued)
NOTE
Some of the wires are fragile.
(2) Carefully pull the control panel (1) and gasket (2) away from the main container noting the location of
the wires and the protective sheet (3).
(3) Remove the protective sheet (3) located between the control panel (1) and the front piece of insulation
(4).
(4) If access is required to the thermistors, the heating element or the thermal switch, remove
the front piece of insulation (3). It may also be necessary to remove the base plate
(Subparagraph 4-16.1q steps (1) thru (3)).
b. Inspecting the switch.
Check the three wires (1) between the switch and the circuit board (2) to determine if
the wires are correctly connected and securely attached.
c. Testing the switch.
1
2
1
