TM 10-7310-241-12&P Change 1     2-5 2-4  PMCS PROCEDURES (Continued) TABLE 2-1.  PREVENTIVE MAINTENANCE CHECKS AND SERVICES (PMCS)   FOR MODELS RAK-15 AND 471012   Location Item   Interval Item to Procedure Not Fully Mission No. Check/ Capable if: Service 1 Before Cover a. Inspect for loose/missing parts If parts such as screws are and physical damage. loose/missing or damaged  it will prevent safe usage. b. Check cover seal is properly Cover seal is badly fitted or loose fitted and not distorted (open cover, and leakage of steam or water is Paragraph 2-9). possible. c. Inspect for dirt, grease, oil or food debris. d. Inspect for signs of corrosion (Paragraph 1-4). 2 Before Inner a. Check inner container is present Container is missing. Fold-down Container and can be easily lifted out of the wire lifting handle is missing or outer container. broken. b. Inspect for physical damage such   Container has damage preventing as holes or large dents. safe usage. c. Inspect for dirt, grease, oil or food debris. d. Inspect for signs of corrosion (Paragraph 1-4). 3 Before Outer a. Inspect for physical damage such   Container has damage preventing Container as holes or large dents.   safe usage. b. Inspect for dirt, grease, oil or food debris. c. Inspect for signs of corrosion (Paragraph 1-4). 4 Before   Main Case a. Inspect for loose/missing parts If parts such as screws are and physical damage. loose/missing or damaged it will prevent safe usage. b. Check case seal is properly fitted Case seal is badly fitted or loose and not distorted. and leakage of steam or water is possible.