TM 10-7310-241-12&P
3-10 Change 1
3-6. CLEANING FOR MODEL RAK-15 (Continued)
(1) Remove any loose food from the main case (1) and case seal (2) by pre-scraping.
(2) Wipe the case seal (2) with a cleaning cloth (Appendix E, Section II, Item 2), which has
been soaked in the heated hand dishwashing compound solution retained in step (8) of
Subparagraph 3-6b.
(3) Wipe the case seal (2) with a damp cleaning cloth (Appendix E, Section II, Item 2) to
remove all traces of hand dishwashing compound.
(4) Clean the main case (1) using a cleaning cloth (Appendix E, Section II, Item 2) and the
heated hand dishwashing compound solution retained in step (8) of Subparagraph
3-6b taking care to avoid splashing the control panel (3).
(5) Rinse the main case (1) with clean, potable water to remove all traces of hand
dishwashing compound taking care to avoid splashing the control panel (3).
(6) Allow the main case (1) to air dry.
(7) Return the HWR to normal service in accordance with step (2) of Subparagraph 3-6a.
3-6.1 CLEANING FOR MODEL 471012
a. Preliminary/Final Procedures.
(1) Ensure the power switch is in the OFF position and the heater is completely cooled.
(2) Remove the cover (Subparagraph 4-12.1a).
b. Cleaning the Inner Container and Spigot..
(1) Clean the inside and outside of the inner container (1) with a solution of dishwashing detergent and
warm water. For tougher stains, a mild scouring pad can be used.
1
2
