TM 10-7310-241-12&P
4-8 Change 1
4-10. TROUBLESHOOTING INSTRUCTIONS FOR MODEL RAK-15 (Continued)
4-10.1 TROUBLESHOOTING INSTRUCTIONS FOR MODEL 471012
Problem
Probable cause
Solution
Inner container sticks in the
main Container.
Inner container's sides are
bowed out.
Carefully tap sides of the inner container
with a rubber mallet, to remove bowing.
Tap has low flow rate.
Lid is closed and latched,
preventing air from entering.
Open lid.
Tap or tap shank is clogged.
Inspect tap and shank. Clean tap and/or
shank if required.
Tap leaks:
- at outlet.
Tap valve seal is leaking.
Inspect tap valve seal. Replace if required.
- at shank.
Shank is loose at tap.
Tighten tap on shank. Re align tap
vertically by loosening the jam nut
then re-tightening.
