TM 5-3895-377-13&P
4-32.
RESISTOR REPLACEMENT (CONT).
NOTE
•
This
paragraph
discusses
replacement of one resistor.
All resistors are replaced in
the same way.
•
Tag and mark all wires prior to
removal.
(2)
Remove two screws (7) and resistor (8)
from junction box (5).
(3)
Remove wires (9) from resistor (8).
b.
Installation.
(1)
Solder wires (9) on resistor (8).
(2)
Install resistor (8) with screws (7) on
junction box (5).
(3)
If removed, install eight cage nuts (6) on
junction box (5).
(4)
Install cover (3) and gasket (4) with eight
lock washers (2) and screws (1) on junction
box (5).
NOTE
Follow-on Maintenance: Remove wheel
chocks (page 2-35).
END OF TASK
4-66
