TM 5-3895-377-13&P
4-47. BRAKE ASSEMBLY REPLACEMENT (CONT).
c. Installation.
(1)
Install backing plate (11) with five lock washers
(18) and nuts (17) on studs (19). Tighten nuts.
(2)
Install brake cylinder (13) with two screw and
washer assemblies (16). Tighten screw and
washer assemblies.
(3)
Install brake line (14) in brake cylinder (13) and
tighten nut (15).
(4)
Install push rods (12) in brake cylinder (13).
(5)
Install adjuster plug (10) in backing plate (11).
(6)
Install brake shoes (5 and 6) with holddown pins
(9) and hold-down springs (8) on backing plate
(11) and in notches of push rods (12).
4-110
