TM 5-3895-377-13&P
4-48. BRAKE ASSEMBLY ADJUSTMENT (CONT).
(10) Lower screw jack (2) by turning handle (3) until tire (4) is on ground.
(11) Remove sand pad from under base of screw jack (2) and stow in stowage box.
(12) Pull pin (1) and position screw jack (2) in the upright position.
(13) Install pin (1) in screw jack (2).
(14) Repeat steps (1) through (13) for remaining brakes.
NOTE
Follow-on Maintenance: Remove wheel chocks (page 2-35).
END OF TASK
4-114
