TM 5-3895-377-13&P
4-59.
SPRING ASSEMBLY AND EQUALIZER REPLACEMENT (CONT).
NOTE
Follow
steps
(7)
through
(9)
if
replacement of equalizer is required.
Both
LH
and
RH
sides
are
removed/installed the same. Position
jack under axle not supported.
(7)
Remove nut (13) and screw (14) from
shackle
links
(15)
and
spring
assembly (16).
(8)
Remove nut (17), screw (18), and
equalizer (19) from hanger (20).
(9)
Remove two nuts (21), two screws
(22), and four shackle links (8 and 15)
from equalizer (19).
b.
Installation.
NOTE
If equalizer was not removed, go to step (5).
(1)
Position four shackle links (8 and 15)
on equalizer (19) with two screws (22)
and nuts (21). Do not tighten nuts.
(2)
Install equalizer (19) in spring hanger
(20) with screw (18) and nut (17).
Tighten nut.
(3)
Install shackle links (15) to spring
assembly (16) with screw (14) and nut
(13).
(4)
Tighten nuts (13 and 21).
4-150
