TM 5-3895-377-13&P
4-61.
CABLE REEL REPLACEMENT.
This task covers:
a.
Removal
c.
Inspection
e.
Pre-Load Check of Bearing
INITIAL SETUP:
Tools and Special Tools
Equipment Condition
Tool Kit, General Mechanic’s: Automotive
Wheels Chocked (page 2-17)
Materials/Parts
Lock Washers
a.
Removal.
(1) Remove cable connector (1) from connector holder.
(2) Remove two straps (2 and 3) and power cable (4)
from reel (5).
(3) Remove two nuts (6), lock washers (7), and screws
(8) from axle (9). Discard lock washers.
(4) Remove axle (9), cable reel (5), and two spacers (10)
from reel mounts (11).
b.
Installation.
(1) With the aid of an assistant, position cable reel (5)
and two spacers (10) between reel mounts (11) and
install axle (9).
(2) Install two screws (8), lock washers (7), and nuts (6)
in axle (9) and reel mounts (11).
(3) Wind power cable (4) around cable reel (5) and
secure with two straps (2 and 3).
(4) Place cable connector (1) in connector holder.
NOTE
Follow-on Maintenance: Remove wheel chocks (page 2-35).
END OF TASK
4-154
