TM 5-3895-377-13&P
d. Assembly.
(1)
Install adjusting plate assembly (10) on nozzle line (8).
(2)
Install knurled nut (9) on nozzle line (8).
(3)
Install nozzle (6) with nut (7) on nozzle line (8). Tighten nut.
(4)
Install head assembly (5) on nozzle (6) and tighten screw (4).
(5)
Install electrodes (3) on clip (2) and tighten screw (1).
e. Installation.
(1)
Refer to adjustment if head, nozzle, and
electrodes were replaced.
(2)
Position adjusting plate assembly (8) in burner
assembly (3).
(3)
Connect ignition leads (9) on electrodes (10).
(4)
Slide adjusting plate assembly (8) in burner
assembly (3).
4-237
