TM 5-3895-377-13&P
(2)
Loosen setscrew (3) and slide electrodes (2) on nozzle line (4) until a gap of 1/8 in. (3.18 mm) is reached
between the face of nozzle and electrode tips. Tighten setscrew (3).
(3)
Loosen screw (5) and slide head assembly (6) on nozzle (7) until a gap of 1/4 in. (6.35 mm) is reached between
the face of nozzle and head assembly. Tighten screw (5).
NOTE
Follow-on Maintenance:
•
Install burner cover (page 4-296).
•
Remove wheel chocks (page 2-35).
END OF TASK
4-239
