TM 5-3895-377-13&P
NOTE
•
Reducer bushing may need to be held in place to remove fuel return line.
•
Hold fuel line while turning fitting to prevent kinking.
(3)
If damaged, remove hose clamp (2) from fuel line (3).
(4)
Remove fuel return line (5) from reducer bushing (6).
(5)
Remove reducer bushing (6) and nipple (7) from fuel pump (1).
(6)
Position drain pan under fuel filter (8).
(7)
Remove fuel supply line (9) from fuel filter
(8).
(8)
Loosen hose clamp (10) and remove fuel
line (3) from fitting (11).
(9)
Remove fitting (11) and reducer bushing
(12) from fuel filter (8).
b.
Disassembly.
(1)
Remove cap (1) and two fittings (2) from
fuel return line (3).
(2)
Remove clear shrink tubing (4) and
identification tag (5) from fuel return line (3).
Discard clear shrink tubing.
(3)
Repeat steps (1) and (2) for fuel supply
hose.
4-283
