TM 5-3895-377-13&P
d.
Assembly.
(1)
Apply adhesive to identification tag (5).
(2)
Install identification tag(5) with clear shrink
tubing (4) on fuel return hose (3).
(3)
Install two fittings (2) and cap (1) on fuel
return line (3).
(4)
Repeat steps (1), (2), and (3) for fuel supply
hose.
e.
Installation.
(1)
Install reducer bushing (12) and fitting (11)
in fuel filter (8).
(2)
Install fuel line (3) with hose clamp (10) on
fitting (11). Tighten clamp.
(3)
Install fuel supply hose (9) on fuel filter (8).
(4)
Install nipple (7) and reducer bushing (6) on
fuel pump (1).
(5)
Install fuel return line (5) on reducer
bushing (6).
(6)
If removed, install hose clamp (2) on fuel
line (3).
(7)
Install fitting (4) and fuel line (3) on fuel
pump (1) and tighten hose clamp (2).
NOTE
Follow-on Maintenance:
•
Install burner cover (page 4-296).
•
Remove wheel chocks (page 2-35).
END OF TASK
4-285
