TM 5-3895-377-13&P
4-105.
HEAT EXCHANGER ASSEMBLY REPLACEMENT (CONT).
b.
Installation.
WARNING
To avoid personal injury, use a hoist or get assistance when lifting components that weighs more than 50
lbs. (23 kg). Ensure all chains, hooks, slings, etc., are in good condition and are of correct capacity.
Ensure hooks are positioned correctly. Always use a spreader bar when necessary. The lifting hooks
must not be side loaded.
NOTE
Heat exchanger weighs 3,500 lb (1,588 kg).
(1)
Using a lifting device, and with the aid of an assistant, aline bracing (29) with cross member (30), and
install heat exchanger (8) and two steel spacers (27) on frame (28) with six springs (26), screws (25),
twelve washers (24) and six locknuts (23).
(2)
Tighten locknuts (23) until springs (26) start to compress.
4-314
