TM 5-3895-377-13&P
3-11.
EXPANSION TANK ASSEMBLY DRAIN/FILL (CONT).
b.
Fill.
NOTE
If filling system from empty or near empty condition, refer to paragraph 2-14 (page 2-
23) and follow instructions for pumping from external source to tank.
(1)
Remove filler cap (1) from expansion tank (2).
WARNING
Oil is slippery and can cause falls. Wipe up spilled oil with rags.
(2)
Fill expansion tank (2) with transfer oil until oil level indicator (3) is in the "COLD OIL LEVEL" range.
(3)
Install filler cap (1) on expansion tank (2).
3-14
