TM 5-3895-377-13&P
3-11.
EXPANSION TANK ASSEMBLY DRAIN/FILL.
This task covers:
a.
Drain
b.
Fill
c.
Check
INITIAL SETUP
Tools and Special Tools
Equipment Condition
Wrench, Pipe
Heater Cooled
Wheels Chocked (page 2-17)
Materials/Parts
Heater Leveled (page 2-17)
Oil, Transfer
a.
Drain.
WARNING
Transfer oil will become extremely
hot during operation. Be careful not
to touch the hot oil or allow hot oil to
come in contact with skin. Transfer
oil can become hot enough to
cause serious burns or death to
personnel.
(1)
Remove transfer hose (1) from hose trough.
(2)
Place drain pan under RETURN and
DRAIN port (2) and remove cap (3).
(3)
Install nut (4) on coupling section (5).
(4)
Install
coupling
section
(5)
on
RETURN and DRAIN port (2).
(5)
Install coupling section (6) on transfer hose
(1).
(6)
Install transfer hose (1) on RETURN and
DRAIN port (2) and tighten nut (4).
(7)
Place open end of transfer hose (1) in
approved receptacle.
3-12