TM 5-3895-377-13&P
3-7.
WHEEL AND TIRE ASSEMBLY REPLACEMENT.
This task covers:
a.
Removal
b.
Installation
INITIAL SETUP
Personal Required
Equipment Condition
Two
Heater Cooled
Wheels Chocked (page 2-17)
a.
Removal
WARNING
Wheel weighs 83 lbs (37.68 kg). Two personnel are required to remove wheel. Failure to do so may
result in injury to personnel.
NOTE
Heater must be on level ground.
(1)
Remove pins (1) and allow screw jacks (2) to swing down.
(2)
Position screw jacks (2) on lower mounts (3).
(3)
Remove sand pads from stowage box and position under base of screw jacks (2).
(4)
Install pins (1).
(5)
Loosen lug nuts (4).
(6)
Raise screw jacks (2) by turning handles (5) until tire clears the ground.
(7)
With the aid of an assistant, remove eight nuts (4) and wheel and tire (6) from studs (7).
3-7
