TM 5-4520-256-14
3-30.
HIGH TENSION CABLE ASSEMBLY MAINTENANCE - Continued.
e. Installation.
(1) Feed cable (8) through wall (1) and into heat exchanger (2).
(2) Connect cable (8) to burner electrodes (7).
(3) Place burner cover (6) into position and secure with eight flat washers (3), eight lockwashers (4), and eight
nuts (5).
(4) Connect cable (8) to transformer (9) terminal.
(5) Repeat for other cable.
(6) Install air filter and access door per para 3-10d.
Figure 3-39. High Tension Cable Assembly, Installation.
3-94