TM 5-4520-256-14
4-7. SKID MAINTENANCE.
This task covers:
a.
Repair
INITIAL SETUP:
Tools Required:
Tool Kit, General Mechanics
Materials Required:
Abrasive Paper (Item 5, Appendix E
Cleaning Solvent (Item 11, Appendix E)
Paint (Item 4, Appendix E)
Primer (Item 8, Appendix E)
WARNING
Cleaning solvent, Federal Specification P-D-680, is toxic and flammable. Use only in a well-
ventilated area. Avoid prolonged breathing of fumes. Keep solvent away from flames. Do
not use in excessive amounts. Avoid skin contact.
Paints are flammable. Use in a-well-ventilated area and remove all possible sources of
ignition to prevent potential injury.
Equipment Conditions:
Heater unit shut down and cool.
Power cable removed from power source.
a.
Repair. Repair is limited to refinishing as follows:
(1)
Use abrasive paper (item 5, Appendix E) to smooth out rough areas.
(2)
Clean and treat per TM 43-0139.
(3)
Prime with one coat of primer (item 8, Appendix E) per MIL-P53022.
(4)
Finish with one coat of paint (item 4, Appendix E) per MIL-C-46168, Type II, Chemical Agent Resistant,
Green 383.
4-18
