BLOWER ASSEMBLY - STEWART-WARNER 1056OM, 1056OM24B1 - Continued
LOCATION
ITEM
ACTION
REMARKS
DISASSEMBLY - Continued
14. Blower housing (1) and
motor subassembly (2)
15.
16. Blower housing (1)
17. Motor subassembly (2)
18. Blower housing (1)
19. Diode mounting
assembly (9)
20. Ventilation blower
wheel (12)
21. Motor (15)
22. Air housing (14)
23.
24. Air housing (14) and
grommet (17)
25. Air housing (14)
Two nut assemblies (3)
Two screw assemblies (4)
Motor subassembly (2)
Two gaskets (5), washers (6),
and one gasket (7)
Plug (8)
Screw assembly (10) and
lead (11)
Setscrew (13)
Ventilation blower wheel (12)
Four screws (16)
Motor (15)
Two leads (18)
Grommet (17)
Unscrew and remove.
a. Mark position of blower
housing (1) to motor sub-
assembly (2).
b. Unscrew and remove.
Remove.
Remove.
Pry out.
a. Unscrew and remove.
b. Pull lead (11) through diode
mounting assembly (9).
a. Rotate wheel (12) so setscrew
(13) is in line with hole in air
housing (14).
b. Unscrew and remove partway.
Remove.
a. Mark position of motor (15) to
air housing (14).
b. Unscrew and remove.
Remove.
Pull through and remove.
Remove.
3-107
TM 9-2540-205-24&P
