TM 9-2540-205-24&P
FIXED WIRE RESISTOR - ESPAR V7S
This task covers:
a. Removal
b. Installation
INITIAL SETUP
Tools
Personnel Required
Tool Kit, Mechanics Gen (Item 1, Appendix B)
63G
Materials/Parts
Equipment Condition
Sealant, silicon (Item 6, Appendix C)
Hood removed (page 3-135)
Tags, marking (Item 9, Appendix C)
LOCATION
ITEM
ACTION
REMARKS
REMOVAL
NOTE
Tag all wires and terminals to aid during installation (page 2-3).
1. Output terminal (1)
Dual lead (2)
a. Cutoff sealant.
b. Remove.
2. Input terminal (3)
Lead (4)
a. Cut off sealant.
b. Remove.
NOTE
Brackets should be level when performing steps 3 through 9.
3. Top insulator ((5), bottom
Screw (8), washer (9),
a. Hold insulator(5), insulator(6),
insulator (6), and nut (7)
and input terminal (3)
and nut (7) in place.
b. Unscrew and take off screw(8)
with washer (9) and terminal
(3).
4. Resistor element (10) and
Top insulator (5), bottom
a. Remove.
bracket (11 )
insulator (6) and nut (7)
b. Repeat steps 3 and 4a for other
end.
Resistor element will
come off with
insulators.
INSTALLATION
5. Bracket (11)
6. Top insulator (5)
7. Input terminal (3)
Nut (7), bottom insulator (6)
Install.
and top insulator (5)
Input terminal (3)
Install.
Resistor element (10)
Install.
3-146
