TM 9-2540-205-24&P
OVERHEAT SWITCH - ESPAR V7S
This task covers:
a. Removal
b. Installation
INITIAL SETUP
Tools
Personnel Required
Tool Kit, Mechanics Gen (Item 1, Appendix B)
63G
Materials/Parts
Sealant, silicon (Item 6, Appendix C)
Tags, marking (Item 9, Appendix C)
LOCATION
ITEM
ACTION
REMARKS
REMOVAL
NOTE
Tag all wires and terminals to aid during installation (page 2-3).
1. Overheat switch (1)
Two leads (2)
a. Cut off sealant.
b. Remove.
2.
Two screws (3)
Unscrew and remove.
3. Heater (4)
Overheat switch (1)
Remove.
INSTALLATION
4. Heater (4)
5. Overheat switch (1)
6.
Overheat switch (1)
Two screws (3)
Two leads (2)
Install.
Screw in and tighten.
a. Install.
b. Apply sealant to terminals
and leads.
3 -148
